|T O P I C R E V I E W
||Posted - 22/01/2012 : 17:31:57
So I'm doing a panto with my electric kit (DTXtreme III Special) at the moment (for a variety of wild and exciting reasons) and I'm using the 6 individual outs on the back.
Now a few questions:
1) It seems to be outputting the sounds without any of the effects I get normally - as in the sound I'm getting in my headphones (a pre fade aux return from the desk) sounds very different. Is there a reason for this?
2) I can't seem to find a way to route the "snare buzz" so it comes out of an individual out. Any ideas? That's still coming out the main stereo out and headphones.
There must be a way to change that - otherwise it's just daft!
Thanks for any help or advice,
|4 L A T E S T R E P L I E S (Newest First)
||Posted - 26/01/2012 : 10:57:09
Simon Edgoose (on here sometimes) is the DTX Jedi.
||Posted - 25/01/2012 : 18:30:18
Metallic, I've routed the pads to the outputs, it's the "effects" that don't seem to route such as snare buzz.
||Posted - 22/01/2012 : 19:33:14
Go to Drumkit > press F2 and then SF2 and press the right-arrow twice. There's an output selector there. Is that what you're looking for?
Page 57 of the manual might be of use.
||Posted - 22/01/2012 : 19:25:01
Dont own a DTX but on similar modules you only get effects on the Main Stereo outs, on the individual outputs you just the "dry" sound.